EKA CODE RESET PROCEEDURE

🔐 EKA Code Entry Steps 

1. Ensure the vehicle is fully locked and the driver’s door is closed. 

2. Insert the key into the driver’s door lock. 

3. Turn the key to the unlock position the number of times corresponding to the first digit of your EKA code. 

4. Turn the key to the lock position the number of times for the second digit. 

5. Repeat for the third and fourth digits, alternating between unlock and lock. 

6. After entering all four digits, turn the key once to unlock, then enter the vehicle and start the engine. 

⚠️ Important Notes 

• The bonnet must be closed. 

• You must wait for the “KEY CODE LOCKOUT” message to disappear before entering the EKA code. 

• The driver’s door latch must be fully functional—if it’s faulty, the BeCM (Body Electrical Control Module) won’t accept the code. 

• If the code doesn’t work, it could be incorrect or the BeCM may be fully locked and require professional unlocking. 

You can find a detailed walkthrough and troubleshooting tips in this Range Rovers Forum thread  

¹ 

, or watch a YouTube guide here